See inside your appliance
Enter the model number of your appliance below to get a breakdown graphic of your appliance.
Locate the model number
on your appliance.
Ready to find your appliance part?
Use our Appliance Part Finder to find the part you need.
Top-Selling Appliance Parts
Why does my oven temperature seem too hot or not hot enough?
WARNING!
To avoid personal injury or death, disconnect your appliance from its power source
before you start any troubleshooting or repair work. Use caution when working inside any appliance.
The oven thermostat is preset at the factory. Many models will
allow you to adjust the thermostat. Over time, it is possible for your
thermostat to lose its calibration.
You may be able to adjust your oven thermostat using a small
screwdriver. The adjusting screw is located on the thermostat valve
stem. Remove the knob and you’ll see the screw underneath it.
You want to turn the oven on and run it through at least two cycles
while watching a calibrating thermometer in the oven for high and low
temperatures. Adjust the screw as necessary to fine tune the
temperature.
Some ranges have a calibration plate or ring instead of a
screw. The ring is located on the back side of the thermostat knob.
Refer to the owner's manual for your product if you want to calibrate
your thermostat using that method.